PV1-F
Single-core tinned copper cable with XLPO insulation and sheath. State system voltage, cross-section and the required standard to select the matching PV1-F documentation.
Request a quote · PV1-FKANGYIDA SUPPLY
PV1-F solar cable
PV1-F
PV1-F is a single-core tinned copper cable with XLPO insulation and sheath for DC-side photovoltaic connections. Include system voltage, design current, route length and installation method in your enquiry to establish the required cross-section. The selected configuration is confirmed against documents specific to PV1-F.
Choose a model to enquire
Applications and requirements
- DC-side photovoltaic connections, matched to the circuit design and voltage.
- Specification enquiries for module connections and combiner or DC distribution box wiring.
- Tinned copper cable requirements with XLPO insulation and sheath where the project specifies PV1-F.
Technical information to check
| Reference construction | Single core; tinned copper conductor; XLPO insulation and XLPO sheath. |
|---|---|
| Documented specification example | The PV1-F 1×16 mm² sheet lists 119/0.4 mm conductor construction and 2PfG 1169/08.07. This sheet is not evidence of certificate coverage for every size. |
| Voltage in the 2020 PV1-F record | AC U₀/U 0.6/1 kV; DC 1.8 kV is labelled maximum permitted voltage, not an unconditional rated-voltage claim. |
| Size scope in the 2020 record | 1×2.5–6.0 mm²; match the order model and size to current documentation. |
| Current-carrying capacity | Depends on temperature, installation method, grouping and the configuration's thermal limits. No universal maximum current is stated. |
What to include in your enquiry
- Specify PV1-F and the project-required standard.
- Provide DC voltage, design current, proposed cross-section and route length.
- Describe cable colour, connectors, environment and installation method.
- Confirm current technical and certification documents for the exact model, size, manufacturer and batch configuration.
Frequently asked questions
Is PV1-F the same as H1Z2Z2-K?
No. Both names occur in solar cable documentation, but they identify separate products. EN 50618, voltage values and certificate scope for H1Z2Z2-K must not be transferred to PV1-F. Specify the required model and match its own technical and certification documents.
What does the 2020 PV1-F record show?
The PV1-F record dated 9 June 2020 lists 1×2.5–6.0 mm², AC 0.6/1 kV and DC 1.8 kV as maximum permitted voltage; it also states that it is not valid for the EU. These are historical document details, not confirmation of current certificate status or supply scope.
What information is needed to select a solar cable size?
Provide system voltage, design current, route length, voltage-drop limit, ambient temperature and installation method. Check cross-section, connectors and thermal limits together. An ampere value without installation conditions is not enough for cable selection.